Sim (System Install Manager) Connection - Q CELLS Q.VOLT-G2 HYB-4.6kW.1.1 Installation Manual

CAUTION
• Turn off Wifi.
• Only turn on Local Area Connection.

7.3.3 SIM (System Install Manager) connection

7.3.3.1 Direct connection
1. Confirm that power is off.
2. Connect two short bars to pin 1-2 and 7-8 on Out Connector Board as shown in the [Figure 7-2].
It makes Control Board to have static IP address so that you can access to System Install Manager (SIM) Page.
Short Bar
Initial setting
(Off-line)
49 I
Entering Initial Installation Information
[ Figure 7-1 : Setting Laptop IP ]
Disconnect the
short bar
[ Figure 7-2 : Connecting Short Bar ]
Final setting
(On-line)