Removing The Battery Enclosure Package - Q CELLS Q.VOLT-G2 HYB-4.6kW.1.1 Installation Manual

3.1.2 Removing the Battery Enclosure Package

As shown in the [Figure 3-2], remove the package components from the enclosure in the following order.
1. Place the system on the installation location.
2. Turn the box upside down.
3. Open the box.
4. Remove the cover on the back of the product.
5. Remove the protective cover on the side of the product.
6. Prepare the lower bracket for the BATTERY. (3 Down Bracket Screws, 1 Down Bracket)
7. Assemble the lower bracket to the BATTERY.
8. Lift the BATTERY.
B A T
T E R
Y
(1)
(5)
[ Figure 3-2 : Process for the Battery Enclosure Package Removal ]
(2) (3)
(6) (7)
(4)
(8)
Package Removal and Inspection
I 14