Table of Contents
Advertisement
5.2 Opening the Front Case Cover
NOTICE
Do not remove the top cover except for special events(A / S).
For normal installation it is not necessary and not allowed to open the upper cover.
Only Q CELLS After Sales is allowed to open or to instruct installer to open in case of
necessary service.
The LCD connector and ground are connected to center of top cover.
Be careful when you detach the front cover.
Make sure to connect the connector and ground before reassembling the front cover.
As shown in the [Table 5-5], The Q.HOME
LED, and a bottom cover for electrical connection. Do not remove the top cover except for special events
(A / S). The Battery pack also has the same method of opening the bottom cover.
A
B
C
ESS HYB-G2 front cover consists of a top cover with LCD and
+
Front View
(A), (C) Screw
D
E
Turn the screws (A ~ F : 6 EA)
counterclockwise to disassemble.
F
Side View
Insert the flat-head screwdriver
as shown below and lift it up.
If bottom cover cannot be removed
even after removing all screws,
the four screws of the top cover
needs to be loosen a bit
[ Table 5-5 : Front Case Open Process ]
(B), (D) Screw
L : 75 mm
L : 35 mm
Electrical Connections
I
30
Advertisement
Table of Contents
