Safety; Intended Use; Men Link (Only For Australia) - Q CELLS Q.VOLT-G2 HYB-4.6kW.1.1 Installation Manual

2. Safety

2.1 Intended Use

NOTICE
• The Q.HOME
• The Q.HOME
The Q.HOME ESS HYB-G2 is designed for residential use. It is a single-phase, Grid-connected system of
+
solar energy sources and Li-Ion Battery energy storage.
The Q.HOME ESS HYB-G2 uses solar energy power connected to the input/output terminal installed on
+
the side of the device in order to :
1) charge the Li-Ion Battery energy storage,
2) provide a supply to the household load, and
3) convert direct current (DC) electricity of the Battery to alternating current (AC) to discharge as
household single-phase load or electric system.
Inverters should not be installed in multiple phase combinations. This device should not be used for any purpose
other than the purpose described in this installation manual. Any substitute use of this device, random change in any
of its parts, and use of components other than sold or recommended by Q CELLS will nullify the product's guarantee.
For example, Q CELLS Li-Ion Battery energy storage should not be replaced by other manufacturer's
Battery storages. For further information on proper use of this device, contact the Q CELLS
Service-Hotline.
2.1.1 MEN Link
(Only for Australia)
1. K1 is PV input DC disconnection switch. K2 is battery DC disconnection switch, K3 is grid breaker,
k5 is main load breaker. K6 is total grid breaker. K4 is sub_load breaker.
2. MEN Link : The INVERTER maintains connection for the internal relay(RL206, RL603, RL601) on neutral wire
when entering the off-gird mode.
ESS HYB-G2 is intended for residential use only.
+
ESS HYB-G2 should not be used for commercial or building.
+
[ Figure 2-1 : MEN Link ]
I 04
Safety