Communication Connection; Internet Connection; Components; Connection Block Diagram - Q CELLS Q.VOLT-G2 HYB-4.6kW.1.1 Installation Manual

6. Communication Connection

6.1 Internet Connection

6.1.1 Components

• Wired Router (not provided in the product package)
• RJ45 general LAN Cable (not provided in the product package, the length of the cable must be
less than 10 m.)

6.1.2 Connection Block Diagram

• LAN (Common carrier → Router) → ESS

6.1.3 Connection Method

Plug the RJ45 LAN Cable between the LAN terminal and the Router. Use the Ethernet crimper to crimp
the cable and connect the cable to RJ45 plug. The RJ45 cable is responsible for communication between
the web and the PMS board.
Sealing Nut
Seal
Housing Sub-Assy
RJ45 LAN CABLE
[ Figure 6-1 : Internet Connection ]
1 2 3 4 5 6 7 8
RJ45 Port
[ Figure 6-2 : RJ45 Cable ]
Support
[ Figure 6-3 : RJ45 External Connector Assembly ]
Router
RJ45 LAN CABLE
RJ45 Plug
Pass the screw nut, seal and support through the RJ-cable
(Cable OD range : 5.0-6.5 mm)
Tighten the screw nut (Tightening torque range : 5-15 kgf·cm)
Common
Carrier
Communication Connection
I 44