Squeegee Mount Assembly Removal - Nilfisk-Advance Adphibian AX 651 Multi EDS Service Manual

Table of Contents

Squeegee Mount Assembly Removal

1. See Figure 18. Disconnect the Squeegee Hose (28) and remove the Squeegee Assembly (12) from the machine.

2. Lower the Squeegee Lever (15) and disconnect the Squeegee Lift Cable (C) from the squeegee mount bracket.

3. Refer to the Caster Wheel Removal section to remove the rear Caster (D).

4. Remove the Screw (E) and slide the Squeegee Mount Assembly (F) away from the chassis.

Service Note: It may be necessary to remove the Squeegee Level Wheel from the Squeegee Mount

Assembly for reinstallation.

Figure 18

58 - Form No. 56043116 - Adphibian™/AX 651 Multi EDS/AquaPLUS™

Table of Contents

Do you have a question about the Adphibian AX 651 Multi EDS and is the answer not in the manual?

Aquaplus ax 651 multi eds