Squeegee Lift Linkage Adjustment (Adphibian and AX 651 Multi EDS Only)
Also refer to the Know Your Machine section. The rear-mounted Squeegee Raise/Lower Lever (36) raises and lowers
the squeegee pick-up tool manually.
Adjust the squeegee tool storage and operating positions as follows:
1. Lower the squeegee assembly to the floor.
2. See Figure 16. The Squeegee Mount Bracket has three Mount Holes (A) for changing the lift cable length.
3. Remove the Hardware Items (B) from the Squeegee Mount Bracket and place in the one of the other holes.
4. Observe that when the lever is lowered the squeegee lift cable has ample free play. Note that this allows the
tool the correct movement to rise and lower (float) so the rear blade remains on the floor surface through normal
adjustments and wear.
Figure 16
Form No. 56043116 - Adphibian™/AX 651 Multi EDS/AquaPLUS™ - 55
Need help?
Do you have a question about the Adphibian AX 651 Multi EDS and is the answer not in the manual?