Sensor Setup Csvision - Output; Output 1 And 2 - optris CompactPlus Connect Operator's Manual

CSvision
Sensor Setup CSvision – Output
4.3.

4.3.1. Output 1 and 2

The device has two outputs (OUT 1, OUT 2) which can be configured
as desired. The following options are available under Mode:
•
Off
•
Analog
•
Alarm
Bei Aktivierung von Analog stehen im Feld Quelle folgende Signalquellen zur Wahl:
▪ TProc
▪ TRatio
▪ T1
▪ T2
▪ Attenuation
▪ TDet
▪ TBox
Process temperature
Ratio temperature
1 channel temperature
2 channel temperature
Signal attenuation in %
Temperature of detector
Sensor temperature
-
99