optris CompactPlus Connect Operator's Manual page 98

-
98 CSvision
Advanced Valley hold
Smart Averaging
Off
peak in addition must decrease by the value of the hysteresis before the
algorithm takes it as a new peak value.
This mode is the inverted function of Advanced Peak hold. The sensor
waits for local minima. Minimum values which are higher than their
predecessors will only be taken over if the temperature has exceeded the
Threshold value beforehand. If Hysteresis is activated a minima in
addition must increase by the value of the hysteresis before the algorithm
takes it as a new minimum value.
If activated, a dynamic average adaptation at high signal edges is active.
If Off is activated, no post processing will happen.
-