Display; Visual Alarms - optris CompactPlus Connect Operator's Manual

-
74 CT
3.4.

Display

In this tab you can make settings for the display and the backlight (= visual alarms). Furthermore, the
temperature unit can be selected here.

3.4.1. Visual Alarms

Independent of the selected signal for the analog output, a signal from the following list can be selected under
General/ Main display Source, which is shown in the digital display of the electronics:
TProc Process temperature
TInt Temperature of detector
TBox General internal temperature inside the housing
For the visual alarm areas up to eight alarm limits can be assigned to a signal. The selected signal can be
selected under Source independent of the value shown in the display and independent of the analog output.
-