Sensor Setup Ctratio - Display; Visual Alarms - optris CompactPlus Connect Operator's Manual

-
50 CTratio
Sensor Setup CTratio – Display
2.5.
In this tab you can make settings for the display and the backlight (=visual alarms). Furthermore, the
temperature unit can be selected here.

2.5.1. Visual Alarms

Independent of the selected signal for the analog output, a signal from the following list can be selected under
General/ Main display source, which is shown in the digital display of the electronics:
TProc Process temperature
TRatio Ratio temperature
T1 Temperature value 1-color-mode
T2 Temperature value 2-color-mode
Attenuation Signal attenuation in %
TDet Temperature of the detector
TBox Temperature of the electronics
For the visual alarm areas up to eight alarm limits can be assigned to a signal. The selected signal can be
selected under Source independent of the value shown in the display and independent of the analog output.
-