optris CompactPlus Connect Operator's Manual page 104

-
104 CSvision
If you select the function Alarm the following signal sources can be
selected:
▪ TProcess
▪ TRatio
▪ T1
▪ T2
▪ Attenuation
▪ TDet
▪ TBox
The definition as Low or High alarm can be done by switching
between Normally: open and Normally: closed.
If you select the function Slope external or Emissivity external the
I/O pin is set as analog input. The scaling can be done using the
parameter fields P1/P2 and Slope P1/P2 / Epsilon P1/P2.
Process temperature
Ratio temperature
1 channel temperature
2 channel temperature
Signal attenuation in %
Detector temperature
Sensor temperature
-