Ricoh MP CW2201 Field Service Manual page 1169

001 0x00 - 0xff
This SP code enables/disables the scanner's FlairAPI function.
bit0
For setting whether to start the HTTP server for FlairAPI or not.
O: All the scanner's FlairAPI functions* are to be disabled.
*Example of FlairAPI functions
• Remote UI
bit1
0: Accessible only from internal devices of the machine (the operation panel, SKD/J, MFP
browser, etc.)
1: Accessible from both internal devices of the machine and external devices (a PC, remote
UI, IT-BOX, etc.)
bit2
0: Accessible only by IPv6
1: Accessible by IPv4 if the IPv4 address is effective or by IPv6 if the IPv4 address is not
effective.
If the IPv4 address is effective, access from the Android operation panel is disabled.
bit3
For setting whether the remote UI (scanner function) is to be used or not
O: Remote UI is not to be used.
1: Remote UI is to be used.
bit4
bit5
bit6
bit7
[0 to 255 / 0 / 1]
FlairAPI server start 0: Off
up
Access permission 0: Disabled
from FlairAPI
external
device
Switching dedicated 0: IPv6 only
IPv6
Remote UI function 0:Disabled
Not used
Not used
Not used
Not used
Scanner Service Mode
1: On
1: Enabled
1: IPv4 priority
1:Enabled
261