Cleaning The Maintenance Unit - Ricoh Ri 100 Maintenance Manual

Cleaning the Maintenance Unit

If a message prompting you to provide regular maintenance
appears, clean the Maintenance Unit.
Press the [▼/Menu] key.
Press the [▲] or [▼/Menu] key to display [Mainte-
nance], and then press the [#Enter] key.
Press the [▲] or [▼/Menu] key to display [Clean Maint
Unit], and then press the [#Enter] key.
When "Press # to clean Maint Unit" is displayed,
press the [#Enter] key.
When "Open Top Cover to clean unit" is displayed,
open the top cover.
The Maintenance Unit will move to a position where you can clean it.
•
Do not touch the toothed rubber belt or ink tubes when cleaning the Main-
tenance Unit. Also, take care not to catch cables or ink tubes with your
sleeves.
4