Reset Lrf Module To Default Settings >Lm,Rd*<Cs><Cr - Safran LRF 6042 Manual

LRF 6042 Integrator Manual
8.7.6 Reset LRF module to default settings >LM,Rd*<CS><CR>
This command resets all LRF module's configuration parameters to their default values.
An automatic restart of the LRF module is performed during the process.
Default parameters are:
 Baud rate  57600
 Range gate max  30000
 Range gate min  00000
 Timestamp  deactivated
 Sorting method  VECTRONIX standard, stronger first
Reset LRF module settings command and response
Command
Inputs
>LM,Rd*<CS><CR>
>LM,Rd*7B<0D>
Response
Outputs
Example of a reset LRF module to default settings command transaction:
Host  LRF Module
Command frame:
LRF Module  Host
Acknowledge frame:
Prompt:
INTEGRATOR MANUAL LRF 6042 917657- A
Confidential & Proprietary  SAFRAN VECTRONIX AG – All rights reserved
Description
Reset LRF module to default settings.
Example.
Description
No response expected.
Table 19: Reset LRF module settings command
>LM,Rd*7B<0D>
>AC*84<0D>
<
Public: 02.2022
Page: 47/64