LRF 6042 Integrator Manual
6 Hardware interface
6.1 Connector description
Power supply and communication between the LRF module and the host system is performed via the system
connector SAMTEC LSHM. It is a hermaphroditic board to board and board to cable design.
While designing the cable and hosts interface, please check chapter 11.4
The following diagrams indicate the system connector's pin out and the description of each signal.
INTEGRATOR MANUAL LRF 6042 917657- A
Confidential & Proprietary SAFRAN VECTRONIX AG – All rights reserved
Figure 9: Connector pinout
Public: 02.2022
Page: 21/64