Safran LRF 7047 Manual page 19

LRF 7047- Integrator Manual
4) After making sure that you have connected and powered up the interface, selected the right
module, press "Start Search"
Module Found
5) If the module is found, press OK and the correct interface values are saved. If it is not found, try
once more. If the module is still not found, enter the interface values manually.
6) Press OK to return to the main screen.
(Please note: values above are for illustration only may differ to your modules requirements)
7) Press "Connect". The button will change colour. Use the commands as required. Note that the
commands change depending on the model chosen. Make sure you have selected the right
module in stage 1
8) The response from the LRF will be shown in the dialog box.
914929_TML_LRF7047_en_Version B
Confidential & Proprietary  Safran Vectronix AG – All rights reserved
Module not found
Public: 04.2019
Page: 19/72