Safran LRF 7047 Manual page 4

LRF 7047- Integrator Manual
NOTICE
Inappropriate use
Use without a plausibility check.

LRF module deployment without prior knowledge of the operating instructions and safety

notices.
 Changes and modifications made to the LRF module by the customer.
Sending any commands other than those specified.

Use of third-party accessories not approved by Safran Vectronix AG.

Working in an explosive environment.

Use of the LRF module without instruction.

 Use outside of the specified limits (see data sheet with article number 915134 Version A).
 Open parts of the LRF module.
Use after misappropriation.

Use of an LRF module with obvious damage or defects.

WARNING
Inappropriate use may bring the risk of:
Misinterpretation of results

Eye injuries

Instrument errors

 Damage to property.
 Malfunction.
NOTICE
Avoiding storage and transport damage
 When not in use, always keep the LRF module packed in a clean and dry (20% - 60% RH)
condition.
 Remove power prior to prolonged storage.
Observe the permissible storage temperatures.

Do not expose the LRF module to strong mechanical shocks.

Do not expose the LRF module to abrupt temperature transitions (risk of condensation).

WARNING
Avoiding measurement errors
 Always perform test measurements on targets at known distances if the LRF module was
exposed to rough handling (vibration, shock, drop etc.), and before carrying out any
important measurement tasks.
 Note the factors affecting measurement accuracy as described in chapter 2.3. Ranging
Conditions.
914929_TML_LRF7047_en_Version B
Confidential & Proprietary  Safran Vectronix AG – All rights reserved
Public: 04.2019
Page: 4/72