Lrf Interface Tools; Lrf Interface Kit; Interface Cable - Safran LRF 7047 Manual

LRF 7047- Integrator Manual

8 LRF Interface Tools

8.1 LRF Interface Kit

Safran Vectronix AG can assist the integration of the LRF 7047 by supplying an LRF Interface Kit (part
number 914752). The aim of the LRF Interface Kit is to enable connection and powering the LRF 7047
before integration begins and to increase personnel safety. The Interface Kit and the LRF Integrator
Manual is enough to get a first impression of the LRF Module.
The Interface Kit consists of:
 Suitcase
Safran Vectronix AG USB stick (incl. manual and terminal software and drivers)

USB to LRF Interface cable including connector to an external power supply

Eye Safety Kit

Screws to mount the LRF

As an alternative to the Safran Vectronix AG Terminal Software, other terminal programs can be used for
testing and PC communication with the LRF. We recommend PTronix SimpleTerm SE. For further
information, please visit http://www.ptronix.com/products/ststandard.htm.

8.2 Interface Cable

An Interface Cable (part number 914225) is available that provides a connection to the LRF via a DUBOX
12 pin shrouded header (Figure 30). The interface cable is connected to the LRF system connector as
shown in Figure 31.
Figure 30: Interface Cable
The following pictures indicate the connector pin-out
Figure 32: Pin out of 914225 Interface Cable connected to the LRF
914929_TML_LRF7047_en_Version B
Confidential & Proprietary  Safran Vectronix AG – All rights reserved
Figure 31: Interface Cable connected to the LRF
Public: 04.2019
Page: 63/72