Nomenclature; Safety; Intended Use Of The Inverter; Safety Precaution For Battery Pack - Alpha ESS SMILE-T10-HV Installation Manual

INFORMATION ON THIS DOCUMENT
NOTICE
NOTICE indicates a situation which, if not avoided, can result in property damage.
INFORMATION provides tips which are valuable for the optimal installation and operation of
the product.

1.4 Nomenclature

Complete designation
SMILE-BAT-8.2PH (INDOOR)
SMILE-BAT-8.2PH (OUTDOOR)
SMILE-T10-HV-INV (INDOOR)
SMILE-T10-HV-INV (OUTDOOR )
SMILE-T10-HV-INV with SMILE-BAT-8.2PH
02
Designation in this document
Battery Pack (INDOOR)
Battery Pack (OUTDOOR)
Inverter (INDOOR)
Inverter (OUTDOOR)
Product
03
02

Safety

2.1 Intended Use of the Inverter

The inverter, the battery pack and the energy meters make up a system for optimization
of self-consumption in a household. The inverter is equipped with two MPP trackers and
converts the direct current from the PV array into grid-compliant three-phase current
and feeds it into the utility grid. The Battery Pack is used for the intermediate storage of
the energy.
The product is suitable for indoor and outdoor use.
The product must only be operated with PV arrays of protection class II in accordance
with IEC 61730, application class A. The PV modules must be compatible with this
prouct.
PV modules with a high capacity to ground must only be used if their coupling capacity
does not exceed 1.0 μF.
All components must remain within their permitted operating ranges at all times.
Use this product only in accordance with the information provided in the enclosed
documentation and with the locally applicable standards and directives. Any other
application may cause personal injury or property damage.
Alterations to the product, e.g. changes or modifications, are only permitted with the
express written permission of AlphaESS. Unauthorized alterations will void guarantee and
warranty claims. AlphaESS shall not be held liable for any damage caused by such
changes.
Any use of the product other than that described in the Intended Use section does not
qualify as appropriate.
The enclosed documentation is an integral part of this product. Keep the documentation
in a convenient place for future reference and observe all instructions contained therein.
The type label must remain permanently attached to the product.

2.2 Safety Precaution for Battery Pack

2.2.1 General Safety Precautions
Over-voltages or wrong wiring can damage the battery pack and cause deflagration,
which can be extremely dangerous.
All types of breakdown of the battery may lead to a leakage of electrolyte or flammable
gas.
Battery pack is not user serviceable. High voltage is present in the device.
Read the label with Warning Symbols and Precautions, which is on the right side of the
battery pack.
Do not connect any AC conductors or PV conductors directly to the Battery Pack which
should be only connected to the Inverter.
Do not charge or discharge damaged battery.
Do not damage the Battery Pack in such ways as dropping, deforming, impacting, cutting
or penetrating with a sharp object. It may cause a leakage of electrolyte or fire.
Do not expose battery to open flame.
SAFETY