Keyboard Sound Turn On / Off; Setting Of The Standby Turn-Off Time - Hermle Z 327 K User Manual

Table of Contents

Figure 10

1.8.6 Keyboard Sound Turn On / Off

Proceed as illustrated, under point 1.8.1, to enter this program mode, press the key, "accel/decel"

(5). In the display; "accel/decel" (A-2) flashes the word, "service". Select the letter, "b" with the

control field (1). As a result, appearing in the display, "rpm/rcf" (A-1), the word "ON/BEEP". By

pressing the key, "rpm/rcf" (4), the keyboard sound (On) or (Off) can be turned on, with the control

field (1), (see Figure 11).

After the settings have been stored by user, the normal program mode can be changed back again

by switching off the centrifuge, for a short period.

Figure 11

After not using the centrifuge for 5 minutes, the centrifuge automatically falls into the standby mode.

The display is switching off and the LED light is flashing slowly with yellow color. By pressing any

key, the centrifuge will be reactivated. The sleep mode can be deactivated or set in the range

between 1 – 60 minutes.

Proceed as illustrated, under point 1.8.1, to enter this program mode, press the key, "accel/decel"

(5). In the display, "accel/decel" (A-2) flashes the word, "service". Select the letter "I" with the control

field (1). As a result, appearing in the display, "rpm/rcf" (A-1), the word "Stby" (see Figure 12 ) . After

pressing the key „rpm/rcf", the standby mode can be turned off or pre-set to the needed value by

turning the control field (1).

Z327K_V1.22_eng

PRODUCT DESCRIPTION

Table of Contents