Song Selection - End Of Run; Keyboard Sound Turn On / Off - Hermle ZK 496 User Manual

1.8.5 Song Selection - End of Run

Proceed as illustrated under point 1.8.1 to enter this program mode, press the key "accel/decel" (5).
In the display "accel/decel" (A-2) flashes the word "service". Select the letter "G" with the adjustable
knob (1). As a result appearing in the display "rpm/rcf" (A-1) the word " SonGo/Sound". After
pressing the key „rpm/rcf" (4) select a song with the adjusting knob (1), (see Figure 9).
After the settings have been stored by successfully, the normal program mode can be changed back
again by switching off the centrifuge for a short period.
Figure 9

1.8.6 Keyboard Sound Turn On / Off

Proceed as illustrated under point 1.8.1 to enter this program mode, press the key "accel/decel" (5).
In the display "accel/decel" (A-2) flashes the word "service". Select the letter "b" with the adjustable
knob (1). As a result appearing in the display "rpm/rcf" (A-1) the word "ON/BEEP". By pressing the
key "rpm/rcf" (4) the keyboard sound (On) or (Off) can be turned on with the adjustable knob (1) (see
Figure 10).
After the settings have been stored successfully, the normal program mode can be changed back
again by switching off the centrifuge for a short period.
Figure 10
© Hermle Labortechnik GmbH ZK496_V1.22_eng
PRODUCT DESCRIPTION
17