Signal Turn On / Off; Keyboard Sound Turn On / Off - Hermle Z 207 H User Manual

Table of Contents

PRODUCT DESCRIPTION

1.8.3

Signal Turn On / Off

Proceed as illustrated, under point 1.8.2, to enter this program mode, press the key; "accel/decel"

(5). In the display, "accel/decel" (A-2) flashes the word, "service". Select the letter, "L" with the

control field (1). As a result, appearing in the display "rpm/rcf" (4), are the words, "On Sound". By

pressing the key, "rpm/rcf" (4), the word "On" flashes, and the sound can be switched off with the

control field (1), (see Figure 2).

After the settings have been stored by user, the normal program mode can be changed back again

by switching off the centrifuge, for a short period.

Figure 2

Proceed as illustrated, under point 1.8.2, to enter this program mode, press the key, "accel/decel"

(5). In the display, "accel/decel" (A-2) flashes the word, "service". Select the letter "b" with the control

field (1). As a result, appearing in the display, "rpm/rcf" (A-1), the word "ON/BEEP". After pressing

the key, "rpm/rcf" (4), turn the keyboard sound (On) or (Off), with the rotorary field (1), (see Figure

3).

After the settings have been stored by user, the normal program mode can be changed back again

by switching off the centrifuge, for a short period.

Figure 3

Z207H_V1.22_eng

Table of Contents