Procedure While Error 38 - Lid Motor Is Blocked - Hermle Z 327 K User Manual

TROUBLE SHOOTING
4.2.4 Procedure while error 38 – Lid motor is blocked
The lid motor is blocked and for 10 seconds the error massage "error 38" is shown in the display
"time" (A-3). After expiring of this error message, please press the key "lid" (7). If the lid lock doesn´t
loose, repeat this procedure two or three more times. If the lid lock still doesn`t loose, the lid must be
opened by using the manual emergency release. Proceed as described in chapter 4.2.1. After
opening the centrifuge lid, switch on again the device. The lid lock adjusts itself in the basic position.
The closing process can be carried out normally again.
If these error occurs again, please contact the service.
31
© Hermle Labortechnik GmbH Z327K_V1.22_eng