Song Selection - End Of Run; Keyboard Sound Turn On / Off - Hermle Z 366 Operating Manual

Figure 5

1.8.4 Song Selection - End of Run

Proceed as illustrated, under point 1.8.1, to enter this program mode, press the key, "accel/decel"
(5). In the display, "accel/decel" (A-2) flashes the word, "service". Select the letter, "G" with the
adjustable knob (1). As a result, appearing in the display, "rpm/rcf" (A-1), the word " SonGo/Sound".
After pressing the key „rpm/rcf" (4), select a song with the adjusting knob (1), (see Figure 6).
After the settings have been stored by user (see 1.8.1), the normal program mode can be changed
back again by switching off the centrifuge, for a short period.
Figure 6

1.8.5 Keyboard Sound Turn On / Off

Proceed as illustrated, under point 1.8.1, to enter this program mode, press the key, "accel/decel"
(5). In the display; "accel/decel" (A-2) flashes the word, "service". Select the letter, "b" with the
adjustable knob (1). As a result, appearing in the display, "rpm/rcf" (A-1), the word "ON/BEEP". By
pressing the key, "rpm/rcf" (4), the keyboard sound (On) or (Off) can be turned on, with the
adjustable knob (1), (see Figure 7).
After the settings have been stored by user (see 1.8.1), the normal program mode can be changed
back again, by switching off the centrifuge, for a short period.
© Hermle Labortechnik GmbH Z366_V1.18_eng
PRODUCT DESCRIPTION
9
8
1
7
11