Figure 6
1.8.2 Temperature Indication
Proceed as illustrated, under point 1.8.1, to enter this program mode, press the key "accel/decel" (5).
In the display, "accel/decel" (A-2) appears the word, "service". Select the letter, "C", with the control
field (1). As a result, appearing in the display, "rpm/rcf" (A-1) are the words, "°C/temp". By pressing
the key, "rpm/rcf" (4), the word "°C" flashes, this allows you to change the display into Fahrenheit
"°F", with the control field (1), (see Figure 7).
After the settings have been stored by user, the normal program mode can be changed back again
by switching off the centrifuge, for a short period.
Figure 7
1.8.3 Sound Signal Turn On / Off
Proceed as illustrated, under point 1.8.1, to enter this program mode, press the key; "accel/decel"
(5). In the display, "accel/decel" (A-2) flashes the word, "service". Select the letter, "L" with the
control field (1). As a result, appearing in the display "rpm/rcf" (4), are the words, "On Sound". By
pressing the key, "rpm/rcf" (4), the word "On" flashes, and the sound can be switched off with the
control field (1), (see Figure 8).
After the settings have been stored by user, the normal program mode can be changed back again
by switching off the centrifuge, for a short period.
© Hermle Labortechnik GmbH
Z327K_V1.22_eng
PRODUCT DESCRIPTION
1
7
2
3
9