Keyboard Sound Turn On / Off; Sleep Mode On / Off - Hermle Z 207 M User Manual

PRODUCT DESCRIPTION
pressing the key, "rpm/rcf" (4), the word "On" flashes, and the sound can be switched off with the
control field (1), (see Figure 4).
After the settings have been stored by user, the normal program mode can be changed back again
by switching off the centrifuge, for a short period.
Figure 4

1.8.4 Keyboard Sound Turn On / Off

Proceed as illustrated, under point 1.8.2, to enter this program mode, press the key, "accel/decel"
(5). In the display, "accel/decel" (A-2) flashes the word, "service". Select the letter "b" with the control
field (1). As a result, appearing in the display, "rpm/rcf" (A-1), the word "ON/BEEP". After pressing
the key, "rpm/rcf" (4), turn the keyboard sound (On) or (Off), with the rotorary field (1), (see Figure
5).
After the settings have been stored by user, the normal program mode can be changed back again
by switching off the centrifuge, for a short period.
Figure 5

1.8.5 Sleep Mode On / Off

After not using the centrifuge for 5 minutes, the display automatically switches off. By pressing any
bottom, it switches on again. Proceed as illustrated, under point 1.8.2, to enter this program mode,
press the key, "accel/decel" (5). In the display, "accel/decel" (A-2) flashes the word, "service". Select
the letter "I" with the control field (1). As a result, appearing in the display, "rpm/rcf" (A-1), the word
"SLEEP". After pressing the key, "rpm/rcf" (4), turn the sleep mode function (On) or (Off), with the
rotorary field (1).
After the settings have been stored by user, the normal program mode can be changed back again
by switching off the centrifuge, for a short period.
10
Z207M_V1.21_eng
© Hermle Labortechnik GmbH