Song Selection - End Of Run; Keyboard Sound Turn On / Off - Hermle Z 307 User Manual

PRODUCT DESCRIPTION
Figure 8

1.8.4 Song Selection - End of Run

Proceed as illustrated, under point 1.8.1, to enter this program mode, press the key, "accel/decel" (5).
In the display, "accel/decel" (A-2) flashes the word, "service". Select the letter, "G" with the control
field (1). As a result, appearing in the display, "rpm/rcf" (A-1), the word " SonGo/Sound". After pressing
the key „rpm/rcf" (4), select a song with the control field (1), (see Figure 9).
After the settings have been stored by user, the normal program mode can be changed back again by
switching off the centrifuge, for a short period.
Figure 9

1.8.5 Keyboard Sound Turn On / Off

Proceed as illustrated, under point 1.8.1, to enter this program mode, press the key, "accel/decel" (5).
In the display; "accel/decel" (A-2) flashes the word, "service". Select the letter, "b" with the control field
(1). As a result, appearing in the display, "rpm/rcf" (A-1), the word "ON/BEEP". By pressing the key,
"rpm/rcf" (4), the keyboard sound (On) or (Off) can be turned on, with the control field (1), (see Figure
10).
After the settings have been stored by user, the normal program mode can be changed back again by
switching off the centrifuge, for a short period.
10
Z307_V1.22_eng
9
8
© Hermle Labortechnik GmbH