Song Selection- End Of Run (Optional); Keyboard Sound Turn On / Off (Optional) - Hermle Z 216 M User Manual

Table of Contents

PRODUCT DESCRIPTION

1.9.5 Song Selection- End of Run (optional)

Proceed as described under point 1.8.2 to enter this program mode and then press the key

„accel/decel" (5). In the display „accel/decel" (A-2) flashes the word „service". Now select the letter

„G". with the adjusting knob (1). As a result appears in the display „rpm/rcf" (A-1) the word „

SonGo/Sound". After pressing the key „rpm/rcf" (4), you can select a song with the adjusting knob

(1). (see figure 7).

After you have stored the settings (see 1.8.2) you changed to the normal program mode again by

switch off the centrifuge for a short while.

Figure 7

Proceed as illustrated, under point 1.8.2, to enter this program mode, press the key, "accel/decel"

(5). In the display, "accel/decel" (A-2) flashes the word, "service". Select the letter "b" with the

adjustable knob (1). As a result, appearing in the display, "rpm/rcf" (A-1), the word "ON/BEEP". After

pressing the key, "rpm/rcf" (4), turn the keyboard sound (On) or (Off), with the adjustable knob (1),

(see Figure 8).

After the settings have been stored by user, the normal program mode can be changed back again

by switching off the centrifuge, for a short period.

Figure 8

Z216M_V2.21_eng

Table of Contents