Table of Contents
Advertisement
32
/56
PoE: see section 3.3
Netpower for 4, 8 or 20
cameras
Computer settings:
• IP address: 10.1.0.11
• Netmask: 255.0.0.0
• Gateway: none
• DNS: none
User:
admin
Password:
meinsm
Connecting to the camera:
see section 3.4
M22M Camera Manual Part 1
3
OPERATING THE CAMERA
3.1 General Remarks on Operating the Camera
The MOBOTIX camera does not require any software installation; all you need is
your preferred browser with JavaScript support to operate the camera. Thus, the
MOBOTIX camera is supported by all common operating systems (such as
Windows, Macintosh and Linux, ...).
3.1.1 Establishing the Power Supply of the Camera
You can choose between the following options:
•
Power over
Ethernet: Power supply using network components that are
conforming to the PoE standard IEEE 802.3af.
•
External power supply and Network Power Adapter
plied via the Ethernet cable from the NPA to the camera (max. length 100 m/
110 yd.).
•
Network
cable: Using the 19" Netpower unit in a patch closet to supply
power via the network cable.
3.1.2 Connecting to the Camera
•
Ethernet interface of the camera
computer via a Network Power Adapter or a switch using a regular patch
cable; launch a browser and enter the IP address printed on the camera
label (e.g. 10.1.0.99).
If your network does not support a Class A network (i.e. 10.x.x.x), your PC
or laptop will have to be set temporarily to such a network address. For oper-
ating systems that allow multi-homing (Windows 2000, Windows XP, Linux,
Mac OS X), you can
set
a
second
address
in
the
10.x.x.x network.
Once a connection has
been established, click on
the Admin Menu button to
start configuring the cam-
era. The Admin Menu con-
trols all network settings (IP
address, netmask, DHCP,
etc.) and other options.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
(10/100 Mbps Ethernet): Directly from a
IP
www.mobotix.com • sales@mobotix.com • 31.1.2007
(NPA): Power is sup-
Advertisement
Table of Contents
