Table 100-45: Test Manually Subdivisions; Table 100-46: System Analyze - Miele PW 6 7 Series Technical Information

PW 6xx7
Service mode (service level)
1

Table 100-45: Test Manually Subdivisions

When the desired item has been selected via the multifunction selector, press
the OK button. The selected service program then starts immediately and can
be stopped when the Back button is pressed.
Note:
All service programs are limited to an overriding safety time of 30 minutes.
System analyze has the following subdivisions:
Service mode (service level)
1 Service programs
1

Table 100-46: System Analyze

If no fault is registered by the system analysis, Function available is
displayed. For specific details on fault information, see the appropriate
function.
When the desired item has been selected via the multifunction selector, press
the OK button. The selected service program then starts immediately and can
be stopped when the Back button is pressed.
Control-power module has the following subdivisions:
Service mode (service level)
1 Service programs
1 Test manually
2
Service program
1 Test manually
1 System analysis
2 Control-power module (component) (ELP 235)
3 Selection-display module (control element) (EW 235)
4 Frequency converter (modulator) (EFU 235)
5 Multifunction module 1 (ELZ 235)
6 Multifunction module 2 (ELZ 235)
7 Multifunction module 3 (ELZ 235)
8 Card reader module
9 Operating data module
10 Load module
11 MPG (German medical product law) module
12 Language
Test manually
1 System analysis
Designation
-
Control-power module (component)
Designation Display
Machine type:
e.g., PW 6107 electric
heating
Heating type
ID number e.g., 123456789
Door open/closed/
Door
locked/unlocked symbol.
93
Technical Information
Display Explanation
Checks all modules and their
sensors to see if they are present.
e.g., Analysis in Checks checksums (tests sums to
progress verify integrity of data and
programs) of operating system,
wash programs, languages, etc.
Explanation
Display of model registered by the control
with type of heating
Display of ELP 235 power module ID
number registered by the control
Control indicates state of door contact
switch