Table of Contents
Related Manuals for Miele PW 6080 Vario LP
Summary of Contents for Miele PW 6080 Vario LP
- Page 1 Commissioning the machine, Programme chart, Settings PW 6080 Vario LP en - GB To avoid the risk of accidents or damage to the machine it is essential to read these instructions before it is installed and commissioned. M.-Nr. 07 530 400...
-
Page 2: Table Of Contents
Contents Commissioning the machine ........4 Programme chart . - Page 3 Contents Water plus ............40 Save .
-
Page 4: Commissioning The Machine
Commissioning must be completed to determine the settings for daily operation. Certain settings can only be altered during the commissioning process. After that, these can only be changed by a Miele service technician. Setting the language J Settings #eština Language F... - Page 5 Commissioning the machine To set the time of day The time may already have been set at the factory. If it has, and is correct, you can skip this section. It is possible to alter the time at any stage via the Settings menu. Settings 24 h clock...
- Page 6 Commissioning the machine Determining target groups By selecting target groups, you are determining the programme range of the washer-extractor. You can see which programmes are assigned to each target group under "Programme chart" later in this booklet. Settings § Fire service Target groups ~ Professional cleaners ~ Special programmes...
- Page 7 Commissioning the machine Each of these settings must now be See the paragraph "Water confirmed (and altered if required). connection" in the "Installation and More details about the settings are connection" section of the Operating given at the end of this booklet. and installation instructions.
- Page 8 ^ Select the option you want. Other settings can only be changed Immediately by a Miele Service Technician. The machine locks straight away. Code required In 3 minutes A code (000) must be entered in The machine will lock after a period order to change the settings.
- Page 9 Commissioning the machine Transit fittings A message will appear in the display to remind you to remove the transport struts. ^ Remove them (if this has not already been done by your fitter). Then press the multi-function selector to confirm that this has been done.
- Page 10 Commissioning the machine Cottons Uni. 60°C Programme selection... 2 Minimum iron 40°C Settings F... 3 Delicates 40°C 15:00 4 Woollens H 30°C To finish the commissioning process completely, a first wash programme must be started. If the power to the machine is switched off before the first wash programme is started (e.g.
-
Page 11: Programme Chart
Programme chart Basic programmes Cottons Hygiene 70°C to 95°C Max. load 8.0 kg Fabric type Cotton, linen or cotton mix fabrics, e.g. bed linen, baby clothing, underwear. Extra options Pre-wash, Starch stop, Rinse hold, Intensive*, Water plus* Detergent Universal detergent Cottons Uni. - Page 12 Programme chart Woollens / Cold to 40°C Max. load 3.0 kg Fabric type Machine-washable or hand-washable wool or wool blend fabrics. Note Max. spin speed 1000 rpm Extra option Rinse hold Detergent Liquid detergent for machine-washable woollens Starch Cold to 40°C Max.
- Page 13 Programme chart Silks / Cold to 30°C Max. load 2.0 kg Fabric type Silks and other handwashable fabrics with no wool content Place socks, tights, bras etc. in a washing bag. Note Max. spin speed 600 rpm Extra options Rinse hold, Water plus* Detergent Liquid detergent for delicates Shirts...
- Page 14 Programme chart Outerwear Cold to 40°C Max. load 4.0 kg ® Fabric type Outerwear made from microfibre such as Gore-Tex ® ® SYMPATEX , WINDSTOPPER etc. Tips – Zip up jackets before washing. – Do not use fabric conditioner. Extra option Rinse hold Detergent Liquid detergent for delicates or fabric specific specialist...
-
Page 15: Household
Programme chart Household Dark garments Cold to 40°C Max. load 4.0 kg Fabric type Dark garments made from cotton or mixed fibre. Wash inside out. Note Max. spin speed 1000 rpm Extra option Rinse hold Detergent Liquid detergent for coloured fabrics Denim Cold to 40°C Max. -
Page 16: Hotel
Programme chart Hotel Kitchen linen 60°C to 95°C Max. load 8.0 kg Fabric type Kitchen linen made from cotton and linen fabrics, e.g. chef's whites, catering uniforms, serving cloths, cleaning cloths. Select Pre-wash for stubborn soiling. Use a detergent containing enzymes for the pre-wash. -
Page 17: Bedding
Programme chart Bedding Pillows 40°C to 95°C 1-2 pillows Items Pillows with feather, down or synthetic fillings. Note A spin cycle is carried out after water is first added in order to deflate the pillows. Extra option Rinse hold Detergent Liquid detergent Down duvets 40°C to 60°C... -
Page 18: Disinfection
Programme chart Disinfection Therm.DIS 15 min 85°C Max. load 8.0 kg Fabric type Cotton, linen or cotton mix fabrics. Notes – Thermal disinfection. – The wash cycle is followed by a disinfection phase at 85°C, with a holding time of 15 minutes. –... -
Page 19: Hygiene
Programme chart Hygiene Hygiene No laundry Hygiene will appear in the display if the last programme selected used a temperature below 55°C or if the Spin programme is selected. You should then run a programme that uses a temperature of at least 60°C or the Hygiene programme. -
Page 20: Bakers/Butchers
Programme chart Bakers/Butchers Flour 40°C to 95°C Max. load 8.0 kg Flour+ 40°C to 95°C Fabric type Overalls, jackets, hats and cloths made from cotton or mixed fibre. – Use a detergent containing enzymes. – Select the Flour + programme for heavy soiling. Note Includes a pre-rinse to remove coarse soiling. -
Page 21: Beauty Salons/Health Spas
Programme chart Beauty salons/Health spas Towels 40°C Max. load 6.0 kg Towels+ 40°C to 80°C Fabric type Lightly soiled cotton towels Tips – For dark coloured fabrics use a detergent for coloured fabrics. – Select the Towels+ programme for heavy soiling. Extra option Rinse hold Detergent... -
Page 22: Fire Service
Programme chart Fire service Masks 10min 70°C 4-5 masks Masks 20min 60°C Masks 30min 40°C Items Breathing masks with head straps Tips – Chemo-thermal disinfection programmes with different temperatures and holding times, for washing and disinfecting breathing masks. – Place masks in a special bag to protect them - one mask to a bag. - Page 23 Programme chart Protective clothing 60°C Max. load 4.0 kg Items Protective clothing (e.g. as used by the fire brigade), overalls, jackets, trousers Tips Do not use to wash items lined in pure wool. Notes – Programme with pre-wash – Max spin speed 1000 rpm Extra option Rinse hold Detergent...
-
Page 24: Professional Cleaners
Programme chart Professional cleaners WetCare sensitive 25°C 4.0-5.0 kg Clothing such as suits and jackets marked with the w or h Fabric type symbols Notes – After wet cleaning, items are treated in a finishing bath. – A liquid finishing agent should be used; this should be added to the fabric conditioner compartment. -
Page 25: Special Programmes
Programme chart Special programmes You can create 5 special programmes and name these. Enter their details in the table below: – For example: – – EXTRA+ – – Pre-wash intensive – – Main wash intensive 95 °C – – Rinse 1 –... -
Page 26: Relay Control For External Dispensing System
Relay control for external dispensing system The machine is fitted with an adapter for an external dispensing system. The external pumps are controlled by relays in the machine. The dispensing containers must be filled with the correct degergent or disinfectant in the order specified. - Page 27 Relay control for external dispensing system Pre- Main wash Main wash Finishing wash Block start Temp. reached Sport Indoor sportswear Outdoor sportswear Hotel Kitchen linen Table linen Curtains Bed linen Bedding Pillows Down duvets Synthetic duvets Natural fibre blankets Disinfection Therm.DIS 15 min CTh.
- Page 28 Relay control for external dispensing system Pre- Main wash Main wash Finishing wash Block start Temp. reached Bakers/Butchers Flour (+) Grease and fat (+) R 1 + R 2 R 1 + R 2 Workwear (+) R 1 + R 2 R 1 + R 2 Beauty salons/Health spas Towels (+)
-
Page 29: Changing Default Settings
All settings may be changed upon entering a code (Settings /Supervisor level menu) Please contact the Miele Service Department for details. Note regarding the commissioning of the machine The machine must be commissioned as described at the beginning of this... -
Page 30: Settings Menu J
Settings menu J To open the Settings menu If the Settings menu is not locked (Code not required), some of the settings may be changed. Cottons Uni. 60°C Programme selection... 2 Minimum iron 40°C Settings F... 3 Delicates 40°C 15:00 4 Woollens H 30°C ^ Select Settings J from the entry menu and confirm your... -
Page 31: Settings/Supervisor Level Menu
Settings/Supervisor level menu To open the Settings/Supervisor level menu The Settings menu can be locked against unauthorised use (except for the Language option). It will then only be able to be accessed at Supervisor level by entering a code. To select a setting Settings Back A Language F... - Page 32 Settings/Supervisor level menu To confirm the code Confirm code Back A ^ Confirm the code you have entered. Code accepted Menu opened You are now in Supervisor level. You can alter the code if you want to prevent it being accessed by unauthorised personnel (see Setting Supervisor level).
-
Page 33: Language J
Settings/Supervisor level menu Language J Sort languages The display can be set to appear in You can select the order that you one of several different languages. want the languages available to appear in in the display if you have To select the language you want, go to first selected the International or the Languages J sub-menu. -
Page 34: Time Of Day
Settings/Supervisor level menu Time of day Supervisor level First select whether you want the You can alter the access code to the clock displayed as a 24 hour or 12 supervisor level. hour clock, or to not display it at all. ^ Enter the old code. -
Page 35: Standby
Settings/Supervisor level menu Standby Memory To save energy, the display goes out If an extra option has been selected after 10 minutes and the Start button for a programme, or the flashes slowly. recommended temperature or spin speed has been altered, the machine Operating the multi-function selector or will store the changes in memory at one of the short cut buttons switches... -
Page 36: Special Programmes
Settings/Supervisor level menu Special programmes You can create 5 special programmes and save these as favourite programmes with their own names. The special programmes are pre-programmed with basic settings. – Wash temperature: cold – Spin speed: without spin – Wash block: Main wash: short –... - Page 37 Settings/Supervisor level menu ^ Confirm Delete again until the symbols you wish to delete have been removed. Save programme name: EXTRA+ _ A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9 / Delete Continue...
- Page 38 Settings/Supervisor level menu 2. Programme creation menu You can choose the programme's features by changing the basic settings. Enter the names of your special programmes and their basic settings into the "Special programmes" table in the "Programme chart". EXTRA+ Back A Temperature Spin speed Wash block...
-
Page 39: Favourites
You can configure the 12 You can choose whether to have the programmes in the basic menu for "Miele Professional" logo or one of machine variant Shortcut keys + your own in the display. (The control Logo (only in conjunction with... -
Page 40: Intensive Water Plus
Settings/Supervisor level menu Intensive water plus Save You can choose whether you want You can choose whether you want the Intensive and Water plus extra the Save option to appear in the main options to be available for selection menu. The save function is required in the Extras menu. -
Page 41: Main Wash Water
Settings/Supervisor level menu Main wash water Low water pressure You can select hot or cold water for This setting can be activated to the main wash. Hot water can only be ensure problem free water intake only taken in if the wash temperature where the water pressure is is above 30°C. -
Page 42: Standard Finish
Settings/Supervisor level menu Standard finish Water level Cottons This option is visible in the display You can increase the water level for but not available on this machine! the main wash in the Cottons hygiene and Cottons universal programmes. The machine is delivered with the Block parameters option selected (the water Disinfection finish level will be controlled according to the... -
Page 43: Pw Duration Cottons
Settings/Supervisor level menu PW duration Cottons Target groups The pre-wash duration can be You can extend your choice of changed in the Cottons hygiene and programmes by activating target Cottons universal programmes. group programmes. The machine is delivered with the Block The target group programmes selected parameters option selected (the wash will be added to the basic programmes. -
Page 44: Pre-Wash
Settings/Supervisor level menu Pre-wash Pre-rinse Cottons You can choose for pre-wash to be A pre-rinse can be carried out in the carried out with every Cottons Cottons hygiene and Cottons hygiene, Cottons universal and universal programmes. Minimum iron programme or to select The machine is delivered with this it each time via the Extras menu. -
Page 45: Coin Mechanism Lock
Settings/Supervisor level menu Coin mechanism lock Demo programme If your machine is fitted with a This can be used by dealers to payment system, you can activate demonstrate the machine in their the lock immediately after the start of showrooms. the programme, or three minutes When On is selected, the machine can after it has started. -
Page 46: Controls
Delay start cannot then get back into Supervisor level. If you need to access it please Using the timer you can set the time contact the Miele Service you wish a programme to finish at Department. (see the Timer section). -
Page 47: Settings Which Can Only Be Changed During The Commissioning Process
If you wish to change any of these it being accessed by unauthorised personnel (the Language J setting settings at a later stage, please contact the Miele Service Department. can still be altered). – Code not required Payment system Only some of the settings can be A coin box needs to be fitted. - Page 48 Alteration rights reserved/2009 M.-Nr. 07 530 400 / 00...