Miele PW 6 7 Series Technical Information page 25

PW 6xx7
Item number in table
8
9
10
11
12
13
Item description Options
Name area 2 All available
alphanumeric and
special characters
Area 3 No, 1 to 10 blocks
Name area 3 All available
alphanumeric and
special characters
Weigh No
Manual
Automatic
Max. load 0.0 kg, 0.2 kg, 0.4
kg, 0.6 kg, ..., 32
kg; in 0.2 kg steps
Min. water level 0 mm, 2 mm, 4
mm, ... 350 mm in
2mm steps
25
Technical Information
Details
Allocation of the name for
area 2. Default factory
setting: Main wash.
Maximum name length 20
characters, e.g., Main wash
90°C.
Fixes the number of
individual blocks in area 3,
e.g., 4 blocks if 4 blocks is
set. If the supervisor/
programmer selects at least
one block here, a name for
the area must be entered.
Default factory setting: No.
Allocation of the name for
area 3. Default factory
setting: Rinses. Maximum
name length 20 characters,
e.g., Final rinse cold.
It is not possible to enter a
weight before the start of the
program. The control
operates with the rated load
for the machine. Default
factory setting: No.
The operator weighs the dry
laundry then enters the
established weight manually
in the machine before the
start of the program.
Using the load module, the
weight of the load can be
entered automatically in the
machine control before the
start of the program.
The coding plug for setting
the model automatically
limits the possible entry to
suit the model in question.
The rated load entry can be
used as a guide for a
reduced load quantity, e.g.,
3.5 kg for Minimum iron;
see Table 100-7. Default
factory setting: Maximum
value in accordance with
machine model coding plug.
For PW 6107, e.g., 10.0 kg.
Here the programmer sets
the minimum water level in
the machine in mm wc (mm
water column) for all blocks
without heating. This figure
sets the lowest level that can
be selected and can be set
between 0 mm to 350 mm in
2mm steps. Default factory
setting: 0 mm.