Drive; Technical Data; Table 060-1: Drive Motor Data; Table 060-2: Tension Of A New Hutchinson 10Pj 1752 Drive Belt - Miele PW 6 7 Series Technical Information

Technical Information
060

Drive

1

Technical Data

Model
PW 6107
PW 6137
PW 6167
PW 6207

Table 060-1: Drive Motor Data

Note:
Measurement is to be carried out in accordance with the
manufacturer's instructions on the measuring instrument. Take care
with the dimensional units of the measuring instrument. There are
still measuring scales in kg (effectively kilopond/newton)! Conversion
factors: 1 kp = 9.80665 N, 1 N = 0.102 kp. A mass of 1 kg exerts a
weight force of almost 1 kp on the earth.
The measurement is taken in the middle of the free-hanging belt span.
After installing and tensioning a new drive belt, allow it to operate and
turn at least 3 times (approximately 15 minutes) before taking the
measurement.
Model
PW 6107 / PW 6137

Table 060-2: Tension of a New Hutchinson 10PJ 1752 Drive Belt

Note:
Measurement is to be carried out in accordance with the
manufacturer's instructions on the measuring instrument. Take care
with the dimensional units of the measuring instrument. There are
still measuring scales in kg (effectively kilopond/newton)! Conversion
factors: 1 kp = 9.80665 N, 1 N = 0.102 kp. A mass of 1 kg exerts a
weight force of almost 1 kp on the earth.
The measurement is taken in the middle of the free-hanging belt span.
To avoid damage, do not tension a drive belt that has been in use for
some time with the same high tension as a new drive belt.
Model
PW 6107 / PW 6137

Table 060-3: Tension of a Hutchinson 10PJ 1752 Drive Belt in Use

Drive motor
3-phase 2200W
3-phase 2200W
3-phase 2500W
3-phase 4300W
Tension of a new Hutchinson 10PJ 1752 drive belt
During installation
Tension Frequency
Krikit2 (tension gauge)
45 to 50 kg 105 to 110 Hz
Tension of a Hutchinson 10PJ 1752 drive belt after it has been in
use for a long period (more than 1 week)
Retension from
Tension Frequency
Krikit2 (tension gauge)
< 25kg < 80Hz
20
Power transmission
Drive belt 10PJ 1752
Drive belt 10PJ 1752
Drive belt 12PJ 2083
Drive belt 12PJ 2083
After running-in (approx. 15
minutes operation)
Tension
Krikit2 (tension gauge)
35 to 40 kg
Retension to Maximum
Tension
Krikit2 (tension gauge)
to 35kg
PW 6xx7
Frequency
90 to 98 Hz
Frequency
to 90Hz