Note For Test Institutes - Miele WCE 330 PWash 2.0 Operating Instructions Manual

Note for test institutes

*
Test programme in accordance with EN 60456 and energy label with
Directive 1061/2010
Consumption data can vary from the nominal values given depending on water
pressure, water hardness, water inlet temperature, room temperature, type and
volume of load, fluctuations in the electricity supply and any extras selected.
With the PowerWash 2.0 washing technique, during the heating phase, the tem-
perature measured by the sensor in the suds container is higher than the actual
temperature of the laundry.
The temperature measured there does not reflect the temperature of the laun-
dry.
Consumption data
79