11 SERVICE WORK ON THE CHASSIS
11.9
48
A00797-11
Removing the lower triple clamp
A00801-10
A00800-10
–
Position the brake caliper. Mount and tighten screws
Guideline
Screw, front
M8
brake caliper
–
Position the brake line and the clamp. Mount and tighten
5
screws
.
Guideline
Screw, brake line
holder
Finishing work
–
Install the front wheel.
(
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Remove the front wheel.
–
Remove the fork legs.
(
–
Remove the start number plate. (
–
Remove front fender. (
p. 53)
–
Remove the handlebar cushion.
Main work
–
1
Open cable holder
on the left and detach the wiring harness.
–
2
Remove screw
.
–
3
Remove screw
.
–
Take off the upper triple clamp with the handlebar and set aside.
Info
Cover the components to protect them against damage.
Do not kink the cables and lines.
–
4
Remove O-ring
.
–
5
Remove protective ring
–
Remove the lower triple clamp with the steering stem.
–
Remove the upper steering head bearing.
4
.
25 Nm (18.4 lbf ft)
Loctite
EJOT
1.7 Nm (1.25 lbf ft)
p. 89)
p. 44)
(
p. 88)
p. 46)
p. 52)
.
®
243™