Barco R9002328 Owner's Manual page 11

* All the safety and operating instructions should be read before using this unit.
* The safety and operating instructions manual should be retained for future
reference.
* All warnings on the equipment and in the documentation manuals should be
adhered to.
* All instructions for operating and use of this equipment must be followed precisely.
1. This product should be operated from an AC power source
Operating AC power voltage of the projector:
BARCOVISION 708
Art.No. R9002327/8
The projector leaves the factory for 120 Vac. Consult your dealer to switch over
to 230 Vac.
If you are not sure of the type of AC power available, consult your dealer or local
power company.
2. This product is equipped with a 3-wire grounding plug, a plug having a third
(grounding) pin. This plug will only fit into a grounding-type power outlet. This is a
safety feature. If you are unable to insert the plug into the outlet, contact your
electrician to replace your obsolete outlet. Do not defeat the purpose of the
grounding-type plug.
WARNING FOR THE CUSTOMERS: THIS APPARATUS MUST BE GROUNDED
(EARTHED) via the supplied 3 conductor AC power cable.
(If the supplied power cable is not the correct one, consult your dealer.)
a. Power cord with ANSI 73.11 plug:
1-4
All manuals and user guides at all-guides.com
(
The wires of the power cord are colored in accor-
dance with the following code.
Green/yellow:ground
White:
Black:
)
neutral
line (live)
R5975059A BARCOVISION 708 200498