Barco R9002328 Owner's Manual page 73

Convergence adjustments af-
fect both the horizontal and
vertical lines of the setup pat-
tern. These adjustments are
performed on the red image
while superimposed on the
green image and then on the
blue image while superimposed
on the green image.
The screen area is divided into
25 areas. Within each area it is
possible to move the horizontal
and vertical lines of the red and
blue picture until they coincide
with the green lines.
Use the control disc to make
horizontal and vertical conver-
gence adjustments in the area
indicated by the box. Pressing
ENTER will move the box to the
next area of the setup pattern
to be converged.
EXIT will move the box back to
the last area.
The ‘guided adjustment’ program will start with the convergence adjustment of
the red picture on the green and continues with the blue image on the green image.
Attention : when green convergence adjustments are available (option). The
control software starts with these green corrections (the menu will indicate it
also). Adjust until the vertical and horizontal lines are straight.
7-20
All manuals and user guides at all-guides.com
25
24
5
20
Pressing
21
green image
red image
<ENTER> to continue
<EXIT> to return
15
23 9
8 14
22
4 1 2
18 6
10
19 7 11
R5975059A BARCOVISION 708 200498
17
16
3
12
13