Barco R9002328 Owner's Manual page 35

PERIPHERAL EQUIPMENT
- Up to 10 inputs (20 inputs when video and S-video) with the RCVDS 05 switcher
and up to 90 inputs when 10 RCVDS switchers are linked via the expansion
modules.
- Serial communication with the projector.
- Remote control buttons on the RCVDS to control the projector (source selection
and analog settings)
- The selected source number will be displayed on a 2 digit display and the selected
input modules will be indicated with a LED on the rear.
For more information about the use of the RCVDS 05, consult the Owner's Manual,
order number: R5975765.
The VS05 can switch up to 5 Composite Video sources, 3 S-Video Sources and
1 RGB analog or component Video source to the projector. In addition, the audio
signal proper to the source, can be switched to an audio amplifier.
Order number : R9827890.
For more information about the use of the VS05, consult the Owner's Manual, order
number: R5975245.
This infra-red receiver unit makes it possible to control the projector from another
room. There is a communication line cable between the IR receiver and the projector
or the RCVDS. The infrared control information from the Remote Control Unit is sent
to the IR Remote Receiver. The IR Remote Receiver 800 displays the selected source
on a 7-segment display.
Order number : R9827515.
4-12
All manuals and user guides at all-guides.com
R5975059A BARCOVISION 708 200498