Barco R9002328 Owner's Manual page 58

All manuals and user guides at all-guides.com
The Internal # pattern menu will
be displayed if the internal cross
hatch pattern has been se-
lected or if no source is con-
nected to the projector.
The table below lists the fac-
tory preset frequencies avail-
able.
Push the control disc up or
down to highlight the desired
cross hatch frequency and
then press ENTER.
kHz/Hz
15.6/50
15.7/60
31.2/50
31.5/60
31.2/50
31.5/60
33.7/60
15.8/60
21.8/60
31.5/70
35.5/87
Note: Before continuing, in-
sure that the lenses are prop-
erly focused and that the CRT
projection angle is correctly ad-
justed. If any misalignment is
noticed, consult a qualified
service technician.
R5975059A BARCOVISION 708 200498
ENTER continues to Guided Adjustment
Mode.
EXIT returns to Setup Pattern Selection.
PAL/SECAM
NTSC
EDTV
IDTV
HDTV EUREKA
HDTV ATV
HDTV HI-VISION
EGA 1
EGA 2
VGA 1,2
VGA 4
ENTER continues with the Picture Tuning
EXIT returns to Setup Pattern Selection or
Internal # Pattern Selection
ADJUST returns to operational mode
15.6/50 PAL/SECAM
é ê
48.5/60 SUPER VGA 1
44.2/70 SUPER VGA 2
61.0/76 SUPER VGA 3
22.2/60 MAC CLASSIC
7-5