Total Run Time - Barco R9002328 Owner's Manual

All manuals and user guides at all-guides.com
The 'Identification' screen gives infor-
mation concerning :
- Projector address. To change the
address of your projector, contact
a qualified service technician.
- Software version.
- Configuration.
Possible installations :
* Front-ceiling
* Front-table
* Rear-ceiling
* Rear-table
- Baud rate PC : transfer speed for communication with an IBM PC (or compat-
ible) or MAC. The baud rate of the projector must be the same as the baud rate
of the connected computer. When there is a difference, contact a qualified
service technician to make the appropriate changes.
- Text ON/OFF
Indicates in operational mode if the bar scale and number indicator will be
displayed and if warnings and failures will be displayed.
ON : displayed
OFF : not displayed
The status can be changed by pressing the 'TEXT' key once on the RCU.
- Serial no. : indicates the fabrication number of the projector. This number can
be useful when calling for technical assistance.

Total Run Time

Highlight
control disc and press ENTER to dis-
play the amount of time the projector
has played since its first start up at
the factory.
R5975059A BARCOVISION 708 200498
V 708
with the
ENTER gives the selected item.
EXIT returns to the Service mode menu.
ADJUST returns to the Operational mode.
PROJECTOR SETUP
TOTAL RUN TIME
ê é
9-5