Horizontal Size Adjustment - Barco R9002328 Owner's Manual

Push the control disc up or
down to highlight
Geometry menu and then press
ENTER.
Adjust the horizontal size by
pushing the control disc to the
right or to the left until the exact
image width is obtained.
Note :
- if the internal # pattern was
selected, this pattern re-
mains on the screen.
- if the genlocked pattern was
H size too
large
Ideal image size
H size too
small
8-22
All manuals and user guides at all-guides.com
on the
ENTER will select horizontal size adjust-
ment
EXIT returns to random access adjustment
mode menu.
ADJUST returns to operational mode
GEOMETRY
H SIZE
ê é
selected, the external source will be
displayed.
A bar scale and a number indicator give
a visual indication of the horizontal size
adjustment.
EXIT will return to Geometry
R5975059A BARCOVISION 708 200498