Barco R9002328 Owner's Manual page 136

All manuals and user guides at all-guides.com
Remove the battery cover on the backside of the Remove the battery cover on the backside of the
remote control by pushing the indicated handle a little remote control by pushing the indicated handle a little
to the bottom of the RCU. Lift up the top side of the cover to the bottom of the RCU. Lift up the top side of the cover
at the same time (fig. 1). at the same time (fig. 1).
Remove the battery from the compartment and discon- Remove the battery from the compartment and discon-
nect the contact plate (fig. 2). nect the contact plate (fig. 2).
Connect a new 9 V battery (type E-block, e.g. 6F22S Connect a new 9 V battery (type E-block, e.g. 6F22S
or equivalent) to the contact plate. or equivalent) to the contact plate.
Insert the battery back into the compartment and put Insert the battery back into the compartment and put
the cover back. the cover back.
Attention : when a new battery is installed, the projec- Attention : when a new battery is installed, the projec-
tor address must be reprogrammed before using the tor address must be reprogrammed before using the
RCU. RCU.
R5975059 BARCOVISION 708 MULTIMEDIA 200498 R5975059A BARCOVISION 708 200498
Contact Contact
plate plate
Battery Battery
fig.1 fig.1
fig.2 fig.2
A-1 A-1