Barco R9002328 Owner's Manual page 129

INPUT 01
Fh= 15.6 kHz
Fv= 050 Hz
SOURCE 01
enter
password
x x x x
text on
text off
PROJECTOR
ADDRESS :
003
WARNING :
input not
available
10-2
All manuals and user guides at all-guides.com
When selecting a new source, information about this
source will be displayed on the screen.
number, horizontal and vertical frequencies of the
displayed source.
Announcement of the selected source.
Message to enter your password. Password contains
4 digits.
These messages will be displayed on the screen when
pushing the TEXT key.
Text ON : the
during the change of an analog control in the
played.
Text OFF : the
during the change of an analog control in the
displayed.
Indication of the projector address when activating the
small object.
When using the projector with the RCVDS, this warn-
ing will be displayed when selecting an input slot of an
RCVDS where the input board is missing.
+ all warnings and failures will be dis-
+ all warnings and failures will not be
button on the RCU with a pencil or other
R5975059A BARCOVISION 708 200498
Source
will be enabled
will be disabled