Power Up Mode - Barco R9002328 Owner's Manual

All manuals and user guides at all-guides.com
The following baud rates are avail-
able :
-9600
-4800
- 2400
- 1200
- 600
- 300
- 150
- 110
The actual baud rate will be high-
lighted. To change the baud rate,
push the control disc up or down or
to the left or to the right to select the
desired baud rate and press EN-
TER to accept this baud rate.

Power up mode

When pressing the power switch,
the projector can start up in 'oper-
ating mode' or in 'stand-by mode'.
Operating mode : the projector start
up and displays image .
Stand-by mode : the projector start
up in stand-by and waits until the
stand-by button or a digit key is
pressed.
To change the Power up mode,
select Power Up mode by pushing
the control disc up or down and
press ENTER to toggle between
'Operating' and 'Stand-by'.
R5975059A BARCOVISION 708 200498
BAUDRATE
ENTER to accept the selected baud
rate.
EXIT to return without changing the
baud rate.
PROJECTOR SETUP
ê
ENTER to toggle between operating and
stand-by.
EXIT to return to the Service menu.
operating
é
9-9