Chapter 6
Signal Input 1
Signal Input 2
Standalone/Parallel
REPO (normally-open)
REPO (normally-closed)
DB-9 Communication Port
Redundant Signal Wiring
(For Parallel Use Only)
Relay Output Contacts
Communication
This chapter describes the:
S
DB-9 communication port
S
X-Slot cards
S
Relay output contacts
S
Programmable signal inputs
S
Remote emergency power-off (REPO)
S
Parallel communication
Figure 73 shows the location of the communication options and control terminals on
the UPS.
Figure 73. Communication Options and Control Terminals (Standalone UPS shown)
Eaton BladeUPS (12 kVA) User's Guide
X-Slot Communication Bay 1
X-Slot Communication Bay 2
S
164201649 Rev 6 www.eaton.com/powerqualtiy
107