Setting Power Strategy; Configuring Battery Settings; Configuring The Ups For Ebms - Eaton Powerware BladeUPS User Manual

OPERATION

Setting Power Strategy

Configuring Battery Settings

104
Eaton BladeUPS (12 kVA) User's Guide
To set the power strategy:
1. Press any button to activate the menu options, then select SETTINGS, USER
SETTINGS, and POWER STRATEGY.
2. Select HIGH EFFICIENCY or STANDARD, and OK to confirm.
The following battery settings are available:
S
Configure the UPS for EBMs
S
BladeUPS 12i model only. Configure the UPS for customer-supplied external batteries
S
Set the level for Battery Low alarm
S
Run automatic battery tests

Configuring the UPS for EBMs

To ensure maximum battery runtime, configure the UPS for the correct number of
EBMs:
1. Press any button on the front panel display to activate the menu options, then
select SETTINGS, USER SETTINGS, BATTERY SETUP, and NUMBER OF EBMS.
2. Use the or buttons to select the number of EBMs according to your UPS
configuration:
All UPS and EBM Cabinets
UPS only
UPS + 1 EBM
UPS + 2 EBMs
UPS + 3 EBMs
UPS + 4 EBMs
3. Press the button to save the setting.
4. Press the ESC button until the Start screen appears.
S
164201649 Rev 6 www.eaton.com/powerqualtiy
Number of EBMs
0 (default)
1
2
3
4