Transferring The Ups Between Modes; Setting Power Strategy - Eaton BladeUPS User Manual

OPERATION

Transferring the UPS Between Modes

From Normal to Bypass Mode. Press any button to activate the menu
options, then select CONTROL and GO TO BYPASS MODE.
From Bypass to Normal Mode. Press any button to activate the menu
options, then select CONTROL and GO TO NORMAL MODE.
Alternatively (standalone UPS only): Press any button to activate the
menu options, then select TURN UPS ON/OFF, TURN UPS ON, and OK
to confirm.

Setting Power Strategy

To set the power strategy:
1.
2.
NOTE Time in the Standard power strategy is limited to 60 minutes when commanded
through the front panel. The setting then automatically returns to High Efficiency.
86 EATON Powerware
Press any button to activate the menu options, then select
SETTINGS, USER SETTINGS, and POWER STRATEGY.
Select HIGH EFFICIENCY or STANDARD, and OK to confirm.
®
BladeUPSt (12 kVA) User's Guide
S
164201649 Rev 3 www.powerware.com