Utility - Hantek DSO1000E Series User Manual

Taking Measurements: For a single waveform (or a waveform divided among multiple
waveforms), up to 4 automatic measurements can be displayed at a time. The waveform channel
must stay in an 'ON' (displayed) state to facilitate the measurement. The automatic measurement
can not be performed on reference or math waveforms, or in XY or Scan mode.

5.5.3 UTILITY

Push the UTILITY key to display the Utility Menu as follows.
Options
System Info Display the software and hardware versions, serial number and some other
information about the oscilloscope.
Update Insert a USB disk with upgrade program and the disk icon at the top left corner is
highlighted. Press the Update Program button and the Software Upgrade dialog
pops up.
Self Cal Press this option and the Self Calibration dialog pops up. Press F6 to perform
the self calibration.
System Turn on/off sound, Change Language and interface, and Time Set
Shutdown Set Action and Time
Probe Ck Refer to 3.3.2
Pass/Fail Pass/ Fail test
Record Record and play back.
Filter Set Filter function.
Display Refer to 5.5.6
Acquire Refer to 5.5.3
DMM Tun on/off DMM fuction.
Frequency Turn on/off frequency counter
More.. Sys Status,, System Features, Flash and Waveform Color.
DSO1000E Series HandHeld Oscilloscope User Manual
The readouts in big font size on
the menu are just results of the
corresponding measurements.
Comments
Basic Operation
34