Waveform Recorder - Hantek DSO1000E Series User Manual

Status Run
Stop
1/2
Display Normal
View All
Manual Off
On
Return
2/2
First choose a source and a measurement. You can choose the recorder functions from the
waveform recorder main menu. To open the main menu, do the following:
【Recorder】
Press
Scope Trend Application Example
Operation steps:
Open trend function
1. Input a signal to CH1 or CH2.
2. Press【Recorder】
3. Press【F2】to choose ScopeTrend.
4. Choose measured parameter and start recording the trend plot.
5. Press【F4】to pause or continue recording data.
Display recorded data
6. Press 【F5】to enter the second page of trend plot menu.
7. Press 【F1】to choose data display mode.
Normal: the screen displays the data up to the minute.
View All: the screen displays all data in the memory.
8. Data analysis: move cursor, analyzing data over time.
9. Press Return to exit trend plot.

8.3 Waveform Recorder

Press 【Recorder】to enter recorder main menu under scan time base, then press
choose ScopeRec.
Waveform Recorder Function Menu
Option
DSO1000E Series HandHeld Oscilloscope User Manual
Continue recording data
Stop or continue recording data
Enter the second page of the menu.
Display the data up to the minute
Display all date in a compressing proportion
Record data automatically
Record data manually. A Record presses a record.
Return to the oscilloscope interface
Return to the first page of the menu
to open the recorder main menu.
to enter the recorder main menu.
Instruction
Recorder
【F2】
to
72